AS WIRE ROPE HOIST | SH WIRE ROPE HOIST | T CHAIN HOIST | KT2000


AS - WIRE ROPE HOIST

The modular solution

The modular conception of R. STAHL wire rope hoists opens up a multitude of variations on the basis of series components. Thus individual, custom-built solutions for special installation situations and operating conditions and applications in special ambient conditions can be realised quickly and economically.

Competence on components
The high quality and efficient functioning of the various sub-assemblies guarantee reliable and long-lasting service:

  1. Maintenance-free rope drum bearing with central drive. Double-grooved rope drums as an option.

  2. Reliable rope tensioner and robust, hard-wearing rope guide.

  3. Three-step spur gear with helical gearing. Additional planetary gear step on the AS. 7… Low-maintenance oil bath lubrication. OVERLOAD CUT-OFF, integrated into gearbox.

  4. Sliding rotor brake motor with two speeds with multi-pole motors.

  5. Enclosed brake. Dirt cannot enter from outside, nor can brake dust escape from inside. Enormously long life of the asbestos-free brake that can be adjusted many times. Very easy maintenance: indication when adjustment is necessary.

  6. Safety final limit switch for top and bottom hook position.
    Operational limit switch is standard.

  7. The operational hoist limit switch E-A is a combination switch: it cuts the wire rope hoist off operationally in highest and lowest hook position. In addition it functions as a final limit switch in highest and lowest hook position.

  8. All hoists are supplied with overlaod cut off motor protections and operating hour counter.



With or without trolley

Hoist
Applications: as stationary hoist or towing equipment or mounted on trolleys or crabs. The rope drum is single-grooved for 1/1, 2/1, 4/1 reeving (6/1 and 8/1 for AS. 7..). If lateral displacement of the hook during hoisting is not desired, the double-grooved version is to be recommended.

Monorail trolleys
“standard headroom” UE
Applications: on monorail runways and single girder cranes. 2 speeds 6,3/25 m/min (60 Hz) as standard, other speeds available. Special designs for curved runway available.

Monorail trolleys
“Short headroom” KE
Application: on monorail runways and single girder cranes. Thus great heights of lift can be achieved even in low-ceiling rooms. 2 travel speeds 6,3/25 m/min (60 Hz) as standard, other speeds available. Special designs for curved runway available.

Double rail crabs
Applications: on double girder cranes. The extremely compact construction with minimal hook approach and headroom dimensions enables the space available to be exploited to the full. Low-maintenance direct drive, with 2 speeds 6,3/25 m/min (60 Hz) as standard, other speeds available.